Cone Shape With 90°K

Tungsten carbide burrs Cone Shape with 90°K for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Advantages

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.

Long tool life.

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm .

Materials that can be worked

Cast steel

Copper

Steel

Steel, cast steel

Tool steels

White annealed cast iron (GTW, GJMW)

Zinc

Applications

Chamfering

Countersinking

Deburring

Milling

Milling out

Working on edges

Working on edges (chamfering, rounding)